WS-C3550-24PWR-SMI
by Cisco
24 x 10/100Base-TX

Unspsc:: 43222612
Upc:: 809385172056
Nsn:: 5895015220091
Description:: The Cisco Catalyst 3550-24 PWR inline power switch is a stackable, multilayer, 24-port 10/100 switch with 2 Gigabit Interface Converter (GBIC)-based Gigabit Ethernet ports ideal for integrated voice, video, and data applications. With integrated inline power, customers can power Cisco IP phones and Cisco Aironet wireless LAN access points directly from the switch and lower the total cost of ownership (TCO) by:Centralizing power provisioningEasing deployment by eliminating the need for wall power to each deviceEliminating the need for additional, separate wiring to power devices The Catalyst 3550-24 PWR switch possesses all of the advanced Layer 2-4 intelligent services available in the Catalyst 3550 Series. Customers can deploy high-performance IP routing, advanced quality of service (QoS), granular rate-limiting, enhanced network security, and multicast management network-wide-while maintaining the simplicity of traditional LAN switching.

Request A Quote

Additional Information: Configurable up to 16,000 unicast routesConfigurable up to 2,000 multicast routesConfigurable Maximum Transmission Unit (MTU) of up to 1,546 Bytes for bridging of MPLS tagged framesUp to 15 Watts of integrated inline power on every 10/100 port Acoustic Noise:ISO 7770, bystander position operating to an ambient temperature of 30 degrees Celsius: 47 dBa

Certifications & Standards: Safety Certifications: UL to UL 1950, Third Editionc-UL to CAN/CSA 22.2 No. 950-95, Third EditionTUV/GS to EN 60950 with Amendment A1-A4 and A11CB to IEC 60950 with all country deviationsNOM to NOM-019-SCFICE Marking Electromagnetic Emissions Certifications:FCC Part 15 Class AEN 55022 Class A (CISPR 22 Class A)VCCI Class AAS/NZS 3548 Class ABSMICE Marking Standards:IEEE 802.1xIEEE 802.1wIEEE 802.1sIEEE 802.3x full duplex on 10BASE-T, 100BASE-TX, and 1000BASE-T portsIEEE 802.1D Spanning-Tree ProtocolIEEE 802.1p CoS PrioritizationIEEE 802.1Q VLANIEEE 802.3adIEEE 802.3 10BASE-T specificationIEEE 802.3u 100BASE-TX specificationIEEE 802.3ab 1000BASE-T specificationIEEE 802.3z 1000BASE-X specification1000BASE-X (GBIC)1000BASE-SX1000BASE-LX/LH1000BASE-ZX1000BASE-CWDM GBIC 1470nm1000BASE-CWDM GBIC 1490nm1000BASE-CWDM GBIC 1510nm1000BASE-CWDM GBIC 1530nm1000BASE-CWDM GBIC 1550nm1000BASE-CWDM GBIC 1570nm1000BASE-CWDM GBIC 1590nm1000BASE-CWDM GBIC 1610nmRMON I and II standardsSNMPv1, SNMPv2c, SNMPv3

Package Contents: This Catalyst 3550 Multilayer Switch Hardware Installation GuideWhere to Find the Catalyst 3550 Documentation flyerCisco Documentation CD-ROMAC power cordMounting kit containing: - Four rubber feet for mounting the switch on a table - Two 19-inch rack-mounting brackets - Six Phillips flat-head screws for attaching the brackets to the switch - Four Phillips machine screws for attaching the brackets to a rack - One cable guide and one black Phillips machine screw for attaching the cable guide to one of the mounting brackets - One RPS connector cover (for wall mounting) - Two Phillips pan-head screws (for attaching the RPS cover) - Four Phillips truss-head screws (for wall-mounting brackets)One RJ-45-to-DB-9 adapter cableCisco Information Packet, containing warranty, safety, and support information