500110
by Netgate

Unspsc:: 43222608
Nsn:: 5330000500110
Description:: The CCTV IP Extender Kit (500110) allows any CCTV IP camera to be connected over extended distance via Cat5e or coax cable. The 500110 supports up to two IP cameras up to 650 ft (200m) at 100 Mbps and up to 1 mile (1.6km) at 25Mbps.

Request A Quote

Technical Specifications
Other Netgate Products

General Information

Product Type: Network Extender

Manufacturer Part Number: 500110

Manufacturer Website Address: http://www.muxlab.com

Manufacturer: MuxLab, Inc

Product Name: CCTV IP Extender Kit

Brand Name: MuxLab

Miscellaneous

Additional Information: Environment CCTV IP Devices CCTV IP cameras, NVR, IP encoders, network switches and any device with a 10/100Mb/s Ethernet port, supporting IP. Transmission Transparent to the user Standard supported Ethernet: IEEE 802.3 10BaseT, IEEE 802.3U 100Base-TX, IP ver 4 and 6. Line side: VDSL-DMT: ITU-T G993.1 VDSL, ITU-T G997.1, G.993.2 VDSL2 (profile 17a). Maximum Distance versus Speed (AsymetricDownstream/Upstream) Cat5e/6 5000ft (1.5km) => 17Mb/s 1.2Mb/s 4000ft (1.2km) => 22Mb/s 5.3Mb/s 3000ft (.9km) => 28Mb/s 10Mb/s 2000ft (.6km) => 34Mb/s 21Mb/s 1000ft (.3km) => 44Mb/s 31Mb/s RG59/U 20AWG Coax 5000ft (1.5km) => 31Mb/s 14Mb/s 4000ft (1.2km) => 39Mb/s 21Mb/s 3000ft (.9km) => 39Mb/s 26Mb/s 2000ft (.6km) => 44Mb/s 28Mb/s 1000ft (.3km) => 44Mb/s 31Mb/s With two (2) cameras connected, maximum distance depends on throughput/resolution/compression ratio of the camera; 5 to 25Mbps per camera Cable between unit Coax 75 ohm or Cat5e/6 twisted-pair. AWG24 or better. Cable between Ethernet port 10Mb/s: CAT3, 4 or 5 UTP up to 100m (330ft). 100Mb/s: CAT5, 5E or 6 UTP up to 100m (330ft). LED Indicators Power, Link, Ethernet: 10/100 Mbps, Ethernet: Activity Connectors One isolated BNC 75 ohm female to connect remote unit. One isolated RJ45 to connect remote unit. One or two metallic RJ45 with leds for Ethernet with auto reversal. One power connector, 2mm. Pin Configuration (polarity insensitive) RJ45 connector: Pin 4 & Pin 5 (1 pair required only, blue and white/blue) BNC: 75 ohms coax cable: Center & Shield (shield is isolated from chassis) Cables for Ethernet port One or two Cat 5e/6 twisted pair cables required (straight or crossover). (Not incl) Power Supplies (Included) 100-240V/5VDC/625mA. Two power supplies with for NA, Eur and UK. Power Consumption 1.2 Watts each unit Temperature Operating: 0° to 60°C Storage: -55° to 85°C Humidity: Up to 95% non-cond. Enclosure Plastic